Quick tip: If you can't connect to the internet, try using one of the Google Public DNS addresses (such as 8.8.8.8) for the 'Alternate DNS server' option.Īfter you complete the steps, the network configuration will apply, and the IP settings will never change.

Under the 'Use the following DNS server addresses' section, in the 'Preferred DNS server' field, specify the IP address of your DNS server, which in most cases is also the router's address - for example, 10.1.4.1.

Specify the default gateway address, which should be the router's address - for example, 10.1.4.1.

Specify a subnet mask for the network ( 255.255.255.0), but the system usually fills this information from you based on the 'IP address.'.

To configure a permanent network configuration, use these steps: If you plan to use the remote desktop feature for some time, you may want to configure a static IP address to avoid reconfiguring port forwarding on the router when the device changes the network configuration. In addition, you will need to know the public address to contact the remote computer.Ī computer usually receives a dynamic IP address from the DHCP server (router), which means it can change.

If the remote connection happens over an internet connection, you will also have to configure the router to allow the remote connection. If you have to connect to another device within the local network, skip to the steps below, and continue with the start a remote desktop connection instructions.

Check the 'Allow connections only from computers running Remote Desktop with Network Level Authentication' option.Ĭontinue with the steps below if you need to configure a remote desktop using an internet connection.

Rdp manager microsoft windows 10